Tag: Gundam

Posted on by

Guess the Model – Part 3 (Building the Arm)

Introduction

In case you missed the previous parts you can catch up here and here. The rules are simple. I build the model in the stages, based on the order in the manual. This stops me deliberately picking obscure parts. I then post up the sections as they are built and readers can guess what the model is. Today I am building the arm.

Technically this should be building the arms, however, I’m going to do building the arm as I got a sinus headache and blurry vision and went to lie down. However, it is enough to show you what it looks like, and to be fair I imagine a lot of people have guessed the model from the torso and head!

Arms 1
First set of parts
Arms 1 Built
First set Built
Arms 2 Parts
Second set of parts
Arms 2 Built
Second set built
Arms 3 Parts
Third set of parts
Arms 3 Built
Third set built
Arms 4 Parts
Fourth set built
Arms 4 Built
All parts built and attached to torso

The first image “First set of parts” has the left and right arm parts. Each set lined up either side of the nippers. They form the shoulder joint and a key part of the elbow joint respectively.

Conclusion

I have to say building the arms on this model is quite a satisfying build. Seeing how all the parts layer up on each other, they create a real depth to the model. I have now completed the other arm. I will say the thumb is really solid on one, but very loose on the other. I’ll recheck the fit later. But so far that is my only gripe. This is a very satisfying build.

If you know what the model is please feel free to comment.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

Guess the Model – Part 2 (Building the Head)

I started this new series of guess the model as I enjoyed the last one so much. I am hoping everyone else did too. The original series can be found here. In this part I will be building the head of the model.

As I am sticking to my game rules (build in the order things are in the manual) I have to continue by building the head next. Now I do feel this may be a bit of a giveaway if the torso wasn’t already! However, here are the parts, and assembled head!

Guess Day 2 1
All the head parts!
Guess Day 2 2
Head Stickers
Guess Day 2 3
Completed Head
Guess Day 2 4
Head on Torso
Guess Day 2 5
Head on Torso Open Chest

As you can see this is just 11 parts and 3 stickers. It is amazing that this few pieces can build up into such a charismatic head.

I’m fairly sure people will know who it is, although people probably guessed from the torso! However I will keep going for anyone who hasn’t and also so people can see him build up.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by — 3 Comments

Guess the Model – Part 1

Introduction

That is right. I enjoyed the last guess the model (I hope you did too) so much I thought I would do it again. For anyone new the format is quite simple. I follow the build manual for a model, in the order it is in the manual, and try, each day, to do an update with one of the sections. Normally this is something like:

  • Foot 1
  • Foot 2
  • Arm 1
  • Arm 2
  • Torso
  • Head
  • Pelvis
  • Weapons

Now you will be glad to hear that this one is following a slightly different format. For a start it begins with:

  • Torso
  • Head

So to be honest you will likely get it quickly. Although to be fair the number of people who got the Zaku II off the feet was pretty impressive! The original series of posts can be found here. You can also read up more about these suits over at gundam.fandom.com.

Images

Guess 1
First Parts
Guess 2
Assembled First Parts
Guess 3
Second Part
Guess 4
Assembled Parts
Guess 5
Third set of Parts
Guess 6
Assembled Parts
Guess 7
Fourth set of parts
Guess 8
Assembled Parts
Guess 9
Fifth set of Parts
Guess 10
Assembled Piece

Above are the build pictures from this stage. As you can see I removed sets of pieces from the runners and then put them together. The pieces I assumed were going on the inside got less “clean-up” than the pieces that were obviously on the outside. This method has however left me with some extra clean-up to do later.

Spot the mistake

Eagle eyed viewers will notice that the left top blue “stripe” ends a little early. That would be because looking at the piece it looked like the end should be tripped for it to fit. However, when I came to the second one I realised you could slide it into place. Lesson learnt! If you get to build this kit then those blue pieces slide in tip first!

Conclusion

So that is todays clue. Let me know if you think you know what the model is!

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

RG Zaku II

Introduction

Ok. I know I have done quite a few posts on the RG Zaku II. But I have to do this one, sort of a show and tell, after finally getting all the bits together to make him his own stand. I am quite proud of the final piece so I thought I would show off what my RG Zaku II looks like now complete.

Zaku II on Stand
Zaku II on Stand

Display

After spending so long teasing this piece, and working on the model, I felt he really needed a decent display. I am lucky enough to have a Cricut machine. So I used that to cut out the logo and wording. I also happened to have the feet and acrylic sheet from thinking about this as an idea previously. The arm helping to support him was salvaged from some cheap imported stands I have. I will do a more detailed piece on the stand at some point in case anyone else wants to make one.

Final Lessons

I have learnt so much from this build. Firstly panel lining can go awry if you aren’t careful. Secondly, pieces can easily break if you are a bit of a muppet and try to bend something that doesn’t have a joint. Thirdly, panel lining really does make a world of different to a model.

The more I work with the models the more I appreciate the build, and the options available to customise them. Everything from decals, to painting, to custom builds. I can’t wait to do some more techniques and to improve on everything from my basic building skills, to my more advanced painting and customising.

If you would like to learn more about the suit then there is some fantastic information over here at gundam.fandom.com.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

Broken Part – Pinning

Introduction

I will be honest. I wasn’t expecting to be posting about my ZAKU II any time soon. I have been doing some work to finish it off. Again, in my hamfisted manner I managed to break a part. I have no idea what was going through my head. However, I did thankfully have the presence of mind to not panic. The part pictured below should not come away from the model. Note this was by no means a fault with the model, and totally a user headspace error.

Broken leg part
Broken leg part

What to do?

I decided that probably the best way to try and repair this would be to pin the piece. For anyone who does not know here is my understanding of pinning. Other people may have different definitions but this is what I am going for. In essence you drill a small hole in your piece that has come off, and into where you want to mount it. You then trim a pin to size and glue it all back together. The pin helps to take the load and strengthen the join.

Equipment

Thankfully I have the four things I needed to hand. A small drill, a pin, some nippers and some glue.

Pin
Pin
Old Nippers
Old Nippers
hand Drill
hand Drill

As you can see I used a good old pair of nippers so as to not ruin the good pair I have. I find it is always handy to have a slightly older pair around for just these occasions. I don’t have a photo of the glue but for reference I was using Gorilla clear glue.

Method

  • Drill a hole through the broken off piece.
  • Align the broken piece with the model with the drill bit still in. Then continue to drill so the lines are aligned. (Be careful not to drill too far and go all the way through!
  • Using the nippers trim the pin to size.
  • Glue the pin into the model.
  • Once dry, add more glue to the pin and push the broken piece into place.

The last pieces (gluing the pin in and into place) can be done all the same time if you prefer.

Then leave your glue to cure and away you go.

Conclusion

Every time I do something like this I promise myself to be more careful next time. However, it was a useful opportunity to remind myself that pinning can be an invaluable technique in repairing a model, or in helping joints or pieces that join together with quite a small surface/join area.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

The Witch From Mercury – Darilbalde

Introduction

With the release of the Witch from Mercury, as you would expect Bandai are also releasing new model kits. These kits both support, and complement the show.

The fourth suit I felt I should cover is the Darilbalde. In the Witch from Mercury this suit is manufactured by the Jeturk company.

You get a great view of this suit during a duel in the show (I am deliberately avoiding spoilers). The suit has an integrated AI which plays a big part in the development of that suits technology.

Darilbalde action pose
Action Pose
Darilbalde standing pose
Standing Pose

Release

The current estimates delivery date in Europe is currently March 2023. However, I would imagine there is some leeway on this. Firstly the actual shipment needs to come in, and with the current global challenges in shipping etc, the date may well be subject to change.

The Model

I love the solid look of this suit. The large calf like sections and the whole bearing of this model make it look/feel beefy. I am not 100% sure on the shoulders, but it does provide a very distinctive look. The head/helmet piece is also very distinctive with the arch piece at the back. I also note that the feet are very much in the current style that seem to be getting designed. This seems to be with a larger heel a gap and then the front of the foot, more like a shoe with a heel. If you want to learn more about this fantastic model/character/suit then please check out this link which has some great information.

Conclusion

I think this has the potential not only to be a very satisfying build, but it would offer an awesome presence on the shelf with other models! Also looking at those images there looks to be plenty of surface area to place decals. All told I think this will be an exciting model when people get it.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

The Witch From Mercury – PHARACT

Introduction

With the release of the Witch from Mercury, as you would expect Bandai are also releasing new model kits. These kits both support, and complement the show.

The third suit I felt I should cover is the Pharact. In the Witch from Mercury this suit is manufactured by Peil Technologies. Despite the laws/rules against it, they have also implemented the GUND Format in this suit.

When you get to see this suit in battle it is absolutely fantastic. Agile, and with the ability to temporarily disable/stun elements of enemy suits. It is totally different to how the other suits operate.

Action Pose
Action Pose
Standing Front
Standing Front

Release

The current estimates delivery date in Europe is currently March 2023. However, I would imagine there is some leeway on this. Firstly the actual shipment needs to come in, and with the current global challenges in shipping etc, the date may well be subject to change.

The Model

As can be seen in the images above the suit has a quite spindly look, especially around the legs and arms. The boosters/jets on the shoulders add a unique character, and work to complement the otherwise very lithe figure. Even the main gun is long and thin as opposed to some of the more chunky rifles carried by other models. I also like the unique foot style/shape they have given this model. All told I think it looks fantastic and I can’t wait to see peoples builds of them. If you want to learn more about this fantastic model/character/suit then please check out this link which has some great information.

Conclusion

I am really excited to see this kit when it is more readily available. I think the way the model is quite thin looking, it will be interesting to see how it builds for people, and their feedback in the forums.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

The Witch From Mercury – DEMI TRAINER

Introduction

With the release of the Witch from Mercury, as you would expect Bandai are also releasing new model kits. These kits both support, and complement the show.

The second suit I felt I should cover is the Demi trainer. In the Witch from Mercury these suits are used in training exercises.

You get to see multiple characters piloting these suits. They are solid all rounders which allow both pilots and mechanics the opportunity to work on the basics.

Demi Trainer A
Running
Demi Trainer B
Standing

Release

The current estimates delivery date in Europe is currently January 2023. However, I would imagine there is some leeway on this. Firstly the actual shipment needs to come in, and with the current global challenges in shipping etc, the date may well be subject to change.

The Model

As can be seen from the images above, the suit has been designed to reflect its place in the world. It is a utility design, functional, and practical. However, I admit to finding it has quite a basic charm, and in some ways hearkens back to some of the early models along with the chest piece design. All that basic functionality aside, there are little details like the head shape, and the beefier forearms that add real character to the model.

Conclusion

I am really excited to see this kit when it is released. It will be interesting to see if the builds of this model will be as enjoyable as some of the other models. However, looking at the price point of this model I think it could be ripe for people buying multiple copies for customisation and dioramas.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla

Posted on by

The Witch From Mercury – Aerial

Introduction

With the release of the Witch from Mercury, as you would expect Bandai are also releasing new model kits. These kits both support, and complement the show.

The first suit I felt I should cover is the XVX-016 Gundam Aerial. It should be noted that these are referred to in the show as GUND-ARM and are driven using the GUND Format.

The Aerial suit, is piloted by the main protagonist of the show Suletta. It is, in my humble opinion, an absolutely fantastic look suit. I also think it makes an absolutely fantastic model.

AERIALa
Leaping
AERIALb
Rear
AERIALc
Front Standing
AERIALd
Leaping Two
AERIALe
Attacking
AERIALf
Parts
AERIALg
Stickers
AERIALh
Stance and Shield

Release

The current estimates delivery date in Europe is currently April 2023. However, I would imagine there is some leeway on this. Firstly the actual shipment needs to come in, and with the current global challenges in shipping etc, the date may well be subject to change.

The Model

As can be seen from the images above, a lot of time and care has gone into making this model. I think it is similar enough to other suits to spot it as a Gundam model, but distinctive enough that it stands up in its own right.

As can be seen in the last image “Stance and Shield” the shield splits apart. I absolutely love this, as it is one of the most striking parts of the model in the show (in my opinion). I love the effect in the show, and I am really happy they have replicated it in the model.

Conclusion

I am really excited to see this kit when it is released. It looks absolutely amazing, and if the build is as enjoyable as the show, and just looking at the images, it will be an absolute pleasure to build.

Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!

Facebook: https://www.facebook.com/profile.php?id=100086701512793
Instagram: https://www.instagram.com/modelkitsltd/
Website: https://modelkitsltd.co.uk

#gundam #gundammodel #model #kit #gunpla