Welcome back to “RG Aile Strike Build Day 5”! After yesterdays little break, I’m back with the latest update. For anyone catching up, I have made a few posts saying how fantastic I thought the RG Aile Strike model is. However, I hadn’t actually built one yet. So I decided it was time for me to put my money where my mouth was.
This series is documenting my build of the Aile Strike along with plenty of pictures.
The Update
Ok well today I was working on the other leg, as Day 4 was the first leg. As this is a carbon copy of the previous post (you can find it here) I didn’t do all the pre and post nub cleaning pictures. Feel free to check out yesterdays post to catch up on that. Again, I can’t say how great the Gray and White Balancers are from GUNPRIMER. They really help polish parts back up to a fantastic finish.
Legs to LeftLegs to RightSide LegsSingle Leg SideLit Side Leg
As you can see from the pictures these parts have also come together really nicely. So far the build hasn’t had anything other than nicely fit together sections. The detailing on the neg parts is brilliant, and I can’t wait to do the panel lining on this model. I think it might take me a while though with all those bits!
Conclusion
I believe the next part is the waist. I often find these sections some of the least interesting parts to build, so I am looking forward to seeing how this one holds up. So far, this build has been a pleasure, and the outer armour has been cleaning up beautifully. Possibly my only niggle so far is I could argue the feet feel a little weird. But once posed the look brilliant.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Ok I admit I didn’t do any building last night. I had so many things on it just got skipped. So this is a mini intermission between the build parts.
Of course that leaves me with the question of what to do to fill the blog! Well thankfully I had a little something in my back pocket.
So I have been trying to work out how to take better photos of my kits. Again, I feel there are going to be a lot more posts on this topic as I learn more.
So before I leap in to what I was playing with let me show you the starting picture.
Ok well after searching my hard drive and my network storage apparently I didn’t keep my original image.
So lesson number 1: Remember to keep the original image!
I will, however, try and describe it.
I posed by RX80-BR figure on one of my stands in front of a green screen. Then I took some pictures. After moving them to the laptop I proceeded to open them up in GIMP and choose what I wanted to work with. After filtering through the images I picked my favourite and got to work.
First I had to set up an alpha channel. Then I used the colour select to select the green and remove a load of it. This highlighted lesson number 2. Lighting is all important. Without good lighting making everything consistent you end up with different shades and bits and pieces of green left. I then moved onto my second tool of choice. I zoomed in and proceeded to use the multi select tool to trace the edges and remove any colour too close to the model.
After an hour or twos work I finally had something I could work with … wait I may be able to show you …
No Background!
This brings me to lesson number 3. Always do things in layers, that way you can add and remove them from the view, or even junk them and start again if needed.
My final step was to select a background and add a blur to it. This gave me the final image which looks like this.
Falling HG
For a first attempt I was quite happy with this. I think it is something that I would enjoy working on improving, and coming up with more ideas for.
If you would like me to do a post in more detail on the GIMP steps I used, and the whole process let me know. I can do a step by step guide for beginners (like me).
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Welcome to “RG Aile Strike Build Day 4” where I am building up an RG Aile strike model. If you haven’t read any of the other parts I would recommend going back to the start. You can find that here. In the first post I covered the box, runners and provide the manual.
If you want to skip that and just get up to speed. I had in previous posts gone on about how nice I think the RG Aile strike model is. I had gone on so much I decided I should put my money where my mouth was and build one myself. This ongoing series is that process. I am not rushing, as can be seen in the earlier parts, and if I am not happy I will go back, disassemble and re-clean and re-build anything I am not happy with.
With that all out of the way lets get to it!
The process
Unless otherwise noted I followed this process for each piece:
Cut off roughly leaving plenty of nub
Trim back the nub with my better nippers
Apply water to my wet and dry sandpaper and sand the nub marks down
Dry the piece
Brush it off with the tooth brush to remove any bits
Re-apply the matt finish using the Gray Balancer
Prep the part with the green side of the White Balancer
Shine the part up with the white side of the White Balancer
If after this I wasn’t happy I would repeat the sanding steps down, and keep iterating until I was happy with the finish.
First Parts
Leg FrameSide ViewFirst PartsParts Attached
As you can see the next thing to build was this leg. The inner frame is straight off the runner. You need to take your time on this. The manual shows you the bits you want to cut. Pay special attention to this as the nubs are tiny and you don’t want to snip anything by accident. The first two parts go on either side of the leg. They clip right on and fit really nicely.
Second Parts
With NubsCleaned UpSide CleanAttached
The next pieces start to attach the armour. As you can see I was leaving healthy nubbage on each piece. I followed the process outlined at the top of the article. Once clean, and seated I moved on to the next armour parts.
Third Parts
Parts With NubsNubs TrimmedPolished PartsApplied rmourArmour Reverse
As you can see this section is adding more armour on to the frame. Each piece fits really nicely. I did have to slow down and double check how everything was sliding in to place. But after slowing myself down a little it all slotted together really nicely. Again I was really happy with how the white armour pieces were cleaning up.
Next … you guessed it more armour parts. Each one I’ve tried to show the nubbed parts and the cleaned parts. Hopefully the end result warrants all this time … I feel that it is looking really nice so far.
Fifth Part
Final Nubs!Cleaned PartsBent LegStraight LegBent Leg
The final set of armour pieces on the leg really do complete the piece. Also look at that articulation!
Conclusion
There are several parts here that have to slide or clip into specific places. However, I found that slowing down, have a close look at the manual, the structure of the grooves and ridges on the parts led to them fitting together beautifully. I am really happy with how the parts have cleaned up, and the current state of the leg.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Ok so I know this is called “RG Aile Strike Build Day 3” but I’ll be honest I wasn’t happy with the feet when I saw the pictures. So after spending hours sorting images, rotating them, re-sizing them, I then settled down with those darn feet!
What are they like now?
Brush Decorated BrushBalancer and FootFoot on BrushRe-cleaned Feet
I started by stripping the feet back down. I took the front piece off to give easier access. Before starting on the red, I gave the rear grey pieces a fresh sandpaper. I wasn’t happy with how they were showing so I decided to do those again. After some sanding I applied the gray balancer, then the green side of the white balancer before finishing with the white side of the white balancer.
Once that was done I took apart the front of each foot. Those, to me, were the worst offending parts. I separated them so that I could get into the joint and sand them down further. I also used the zoom on my phone, along with a new LED lamp to help me see any of the imperfections. Once I was happy with the sanding I followed the same balancer routine as on the grey parts.
I don’t mind admitting I put them together and took them apart a couple of times and repeated the process until I was happy. I am determined this will not be a rush job. Interestingly this also gave me a better feel for taking the foot apart and re-assembling it.
Once I was happy with the front section I proceeded to sand the middle and rear sections. I left these in place as I didn’t have issues around their joints. Once I was happy with the new sanding I again applied the balancers to bring the shine back up.
Conclusion
I hope you will agree with me that they have a far nicer finish after the second round of cleaning up. I certainly am a lot happier. They polished nicely, and I also found that I managed to just make them look smoother.
I am definitely glad that I went back and re-did those parts. As I said this won’t be my fastest build, but it will be interesting to see the overall finish on the model.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
RG Aile Strike Build Day 2 covers what I managed to do in the first section of the build.
This build, unlike my “Guess the model” builds is going to be more evenly paced. As long as I have enough to warrant posting an update I will. Otherwise I’ll pickup a different topic and then follow on when there is a decent update.
What comes first
Well I already did a post about the tools, the box, the runners, and the manual. I even included a link to a PDF of the manual that I put together in case anyone is desperate to read the RG Aile Strike manual. You can find that post here.
So now that pre-amble is done, lets get on with the build!
First Bits
First CutCleaned UpUnder Side One Part FittedBoth FittedFirst parts of the feet
As you can see the main “bulk” part of the foot and ankle are cast as a single part. The ball joint is cast as part of this, and I still have no idea how they manage to cast a fully working ball joint! I then cleaned up the nubs and flipped the parts over. The smaller parts attach to the under side of the larger part. The fit together fairly snuggly, but once clipped in feel really nicely placed.
Second Bits
Freshly CutTrimmed BubsMore NubsEven More NubsWet SandpaperCleaned PartsUpside Down PartsBottom Plate FittedTop Cover FittedFirst Foot Covers
As you can see my first “rough” cut leaves a fair amount of nub. My second trimming cut leaves a much cleaner cut. At this point it is starting to look a bit better. After the second cut I then added some water to my wet and dry sandpaper and cleaned them down flush. Once I could run a finger nail over them without it catching I then did 5 passes with the Gray Balancer, 5 passes on the green side of the White Balancer, followed by 5 passes on the White side of the White Balancer. This left me with the “Cleaned Parts” picture. Any discolouration left is from the plastic / moulding and would need painting to hide. However the parts are smooth and shiny, just like they were on the runner!
I then needed to attach the parts. Each “foot” has a flat part which has a small plastic column that slots into a hole in the black piece. In “bottom plate fitted” above you can see one ready to be put in place and one attached. The cover / second piece (as you can see in the final photo) attaches to the 3 posts on the flat piece and clips firmly into place.
Third Bits
First CutTrimmed NubsCleaned PartsReady To AttachBottom AttachedTop AttachedThe Feet
The next section was the middle section of the feet. As you can see I started with the wider cut, then the trimmed cut and finally the sanding and cleanup. Now I will say that these closeup pictures don’t, in my opinion, do them justice. However, as this isn’t a speed build I’m going to go back and clean them up even further to see how clean I can get them. As you can see the red piece attached from underneath, and the white piece then slots in on top. Once the white piece was lined up properly it slotted straight in.
Fourth Bits
Nubs AhoyNubs RemovedCleaned UpReady To AttachFitted
Again as you can see, I went for the leave a nub, close cut the nubs off, then clean the pieces up. The heel consists of the flat piece that attaches underneath the foot onto a peg, and then the rear piece that curves around the heel and slots into place. Again, at the risk of sounding like a fan boy, these pieces go together really satisfyingly.
Fifth Bits
Pieces With NubsCleaned PiecesReady to attachPieces connectedFront Section With NubsCleanedComplete Foot
The final part of the foot was, in my opinion, the most fiddly. The two initial side pieces clip on to the sides of the grey piece. Then the final section slides over the top giving it more stability, and completing the stylistic look.
Conclusion
That concludes “RG Aile Strike Build Day 2”. However, as I said, I am going to revisit the feet. This isn’t a “fast” build, rather I want to see how clean a build I can make it.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
RG Aile Strike Build Day 1 is the first part in the RG build. In a previous post I said I needed to put my money where my mouth is and show off this model. I think it looks stunning, and I am really looking forward to this. I will post up the progress I make on this. However, unlike my “Guess the Model” series I won’t be ensuring I complete a section in a day. I will rather focus on more detail.
The setup
Before starting the build I wanted to show the box, parts tools, etc.
The Box
RG_Aile_Strike_BoxRG_Aile_Strike_Box_Contents
The box, like many RG boxes, is relatively compact. When you open it up you are greeted by the usual clear plastic packed Runners. I have to say I’m a little unsure as to why the runners are packed into clear plastic bags. It doesn’t seem to add anything. However, that is a different disccussion!
When you unpack everything you get to see what the kits is actually going to be made of.
RG_Aile_Strike_Runners
As you can see the kit consists of 8 runners, a decal sheet (stickers) and the manual.
The runners
Here is a closeup of the individual runners and the decal sheet.
Although the manual only has 16 pages I added some closeups on the Decal page on the rear of the manual. I also ombined the above images into a single PDF that you can get here if you need it.
The Tools
Everything above covers the box, and its contents. Next up are the tools I plan on using to complete the build.
Tools
As you can see they are pretty standard fare. The Red handled nippers are for first cuts. The orange handled ones for the closer cut. The knife in case I need to shave anything closer. The 600 grit to smooth things down and the dropper bottle of water as it is wet and dry sandpaper so adding water prolongs the life of it. the Gunprimer balancers and brush for cleaning up after the nubs and removing particles from the balancers. The Oral-B to clean up bits from the model after sanding. Finally the tweezers and parts separator. The tweezers are to help me place decals, and the separator in case I need to split anything back apart.
I think, I will likely also use my panel lining pens and various top coat cans. I will include those when / if I use them.
Conclusion
I am really looking forward to this build. After all the bigging up I have done on how great I think it looks, I am super excited!
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Welcome to “Advert / Stock 12/02/2023” this weeks update on any changes in stock and a blatant advert for the shop 😀
So I have had a mini box with a few items in this week which was nice. However, before I leap in there I should remind everyone, that if they are after this beast:
PG_Unicorn_RX_0_7
It is still (at the time of writing) available at the shop here.
So moving on from the Unicorn we have had some HG, MG and RG action this week!
Why not pop across to the shop https://modelkitsltd.co.uk/shop and have a browse on what we have in. If you want to jump to a specific topic/type of kit the links are below.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Put my money where my mouth is! Ok that sounds like a click bait title. But let me explain!
So in my previous post I was banging on about how amazing I think the RG Aile Strike is. I also, in previous posts have banged on about how great I think the GUNPRIMER products are.
So to this end I have decided to quite literally put my money where my mouth is. My next series of posts are going to be centred around the RG Aile Strike.
What is the plan I hear you cry. Well I think it is time to start showing off everything start to finish.
Step one is the prep. I have just ordered what I hope will be a workable mini green screen style box to improve my sometimes shonky photos. I will also pop to my storage and pickup an RG Aile Strike for the build. I already have the GUNPRIMER Gray and White Balancers here so that gets it ready to go.
RG Aile Strike Box
From all the images this looks to be a truly outstanding model. So I thought why not take people through the build, and give honest feedback on the whole process. This isn’t going to be a rushed job, and I will have to take slight detours from time to time. However, hopefully, the end result will show what a fantastic model this is.
For anyone interested you can pickup the model in the shop (at the time of writing) here.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
I was curious, about making some custom decals. Now this wasn’t a case of I had to, this was purely an experiment. As the sticks are sometimes a bit jarring when they are applied, I thought I would look at how hard it would be to make my own decals.
Tools of the trade
After some research I found that really, you don’t need a lot of things to do this.
Water slide decal paper
A printer (suitable for use with the paper you bought)
A graphics application
Some topcoat
Water Slide decal paper can be bought online. It isn’t the cheapest, and it normally stipulates what type of printer it works with (for example inkjet). The printer, topcoat and graphics application I actually already had. So the only thing I had to buy specifically for this was the paper.
For the graphics manipulation I chose to use GIMP (available here) as it is free, and there are plenty of online tutorials that can help you get the best from it.
Making the images
To create my sample page / decals I decided to do some googling. I found some great examples that I used as inspiration for creating my first sheet. The final A4 page looked like this:
Decal Sheet
I realise there is a lot of wasted paper here but I just wanted to test it all out. Next I used the waterslide paper I purchased off ebay and printed the above image onto it.
I left it overnight then just to make sure the ink had dried. I realise this is overkill, but I wasn’t in a rush.
The next step was to apply top coat to the sheet. I opted for 3 coats leaving it well over 10 minutes between each coat.
I finally had my sheet to try!
Testing
Ok I won’t lie. My first test was a disaster. But I think that was more to do with me not understanding how to apply them, and less to do with the decal. Applying them was, once I had some practice, easy enough. I ended up adding some to my heavy arms leg launchers.
Side DecalsTop Decals
On the images above the little nuclear sign, and the red triangle and “caution” sign on the left image were custom ones from my print. The one on the image to the right is also a custom one.
Conclusion
All told I think the experiment was a success. I definitely found they worked best on lighter/white backgrounds but other than that I was very happy with the end result.
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
Today I am going to strip down a MG Heavyarms Foot and build it back up. On the whole this isn’t a difficult process, but for anyone who hasn’t built one and curious, here it goes!
The Parts
MG Foot Parts
With a little help from a parts separator I split apart the pieces. As you can see the MH Heavyarms foot consists of 8 separate parts.
First Step
Foot Body and top coverHow The foot will lookBody attached to base plate
I decided to show you the first two images to show what is happening. When the main foot bod (the big solid grey piece) is in place you will get a small “nub” style post sticking up through the hole of the red top cover. The first step is to attach the main body to the flat bottom of the foot.
Step 2
Foot bottom and top coverBottom of foot together
Next you need to attach the top red cover over the top. As you can see the small post sticks out of the hole. Everything should fit snugly. Any problems and the likelihood is nubs that need to be sanded back / removed.
Step 3
First Rear PieceWhite part attached
The next piece that needs to be attached is the white section of the heel. This slides into place and is quite snug. I found that it fits perfectly though.
Step 4
Heel sectionAttached Heel
Next is the heel piece. Again this fits in snugly and isn’t a problem. I found that all the pieces clipped together in a really satisfying way.
Step 5
White Front PieceAttached Front White Piece
After the heel I started to build up for the rest of the foot. The white section fits down into the post that sticks up from the hole in the middle of the large red part.
Step 6
Ankle Joint and FootConnected Ankle Joint
Now the main body of the foot is attached it is time to connect the ankle joint. The top of this part has a small ball joint to go into the bottom of the leg, and a larger ball joint that goes into the socket in the foot. This clicks in really snuggly, and I found, gives a good combination of friction and articulation.
Step 7
Front White PieceFront ConnectorAdded front section
The front section of the foot has a clip/connector that slots onto the front grey section of the ankle joint. Again I feel Bandai have done a great job as the pieces slide together and hold really nicely. That concludes the build up of the foot. A simple part of the build, but for me I always find them really satisfying due to the way the pieces go together, and the speed with which you see that model part take shape.
Articulation
Arched FootRight articulationLeft Articulation
As you can see in the images above the articulation is pretty good. I don’t think it is “the best” but it is certainly good enough for Heavyarms! Lets be honest, with all that weaponry the suit is likely to spend most of its time in some form of standing position. The left and right articulation on the ankle is adequate, and the arching on the foot is about the same, in my opinion.
Conclusion
There we have a mini tear down and rebuild of the foot on the MG Heavyarms. I found taking it apart and rebuilding it oddly therapeutic. However, as soon as I had it apart I had it back together again! As you may have noticed I haven’t panel lined this model. I may do that at some point, but first I need to put on a matt coat!
Thank you for taking the time to read this. If you haven’t already done so please like and follow us on our social media platforms and checkout our website!
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
